Conformity Product Declaration IBP Bänninger

Parma,
Lunedì 12 gennaio 2015
Conformity Product Declaration
Ref.ce: DCP_EN17050_ 0000_ 0000_ MG5000 _01 16
IBP Bänninger Italia srl,
ubicata in Piazza Meuccio Ruini 9A, 43126 Parma (IT)
DEALER
of fittings branded >B< MG5000 Series solder and solder/screw
with threaded ended copper and copper in copper alloy (Copper)
suitable for use in piping systems and medical gas distribution
up to a maximum pressure of 2,000 kPa (19.74 bar) and vacuum systems.
ACCORDINGLY
that threaded ended are conform to
standards UNI EN 10226-1, UNI EN ISO 228-1, DIN 2999-1;
that the copper alloy CW024A (Cu-DHP 99,9 %) with which the fitting's body is built, is in according by
standards UNI EN 12449
that the fittings, meet the requirements of the DVGW (Test Protocol GW 8);
and the D.M. of April 6 2004, n. 174 to annex 1 "Human Drinking Water consumption… rule";
che i raccordi sono conformi alle disposizioni del DVGW (Protocolli di Prova W534, W551, W552, W553);
that the series in object is not subject to registration for the EACH directive by IBP Bänninger Italia srl
("EACH" pre-registration of bases made by IBP CONEX UNIVERSAL LIMITED, supplier of IBP Bänninger Italia srl);
suitable for maximum working temperatures of 200 °C
C (maximum operating pressures according to the type application)
DECLARES THAT
the Series >B< MG5000
is in according by standards UNI EN 1254-1, UNI EN 1254-4, UNI EN 1254-5
can be used in coupling with fittings defined by the standard UNI EN 1254-4,
can be used in coupling with tubes defined by the standard UNI EN 1057
(Test Protocol DVGW GW 392), UNI EN 12449, UNI EN 13348;
are respected the hygienic requirements as prescribed by the UNI EN 13347,
within the limits set by the UNI EN 1254-1 relatively to the cleaning:
the maximum total carbon level on internal surfaces shall not exceed 1,0 mg/dm2;
the determination of the carbon content is carried out based on the reference method described in standard EN 723,
the warranty is in compliance with the National Legislation in force,
from the date of sale, only for defects of material and production proven and attributable to the responsibility of IBP;
is manufactured in Companies operating in compliance with standards UNI EN ISO 9001, UNI EN ISO 14001;
offers a life expectancy of 30 years (subject to the proper conditions of installation and use).
This declaration is in compliance with requirements, UNI EN 1655 and UNI CEI EN ISO / IEC 17050-1
Modello:
Protocollo:
11 - 0002 Compilato il:
40777
Ballerini Giovanni
327125 _ 0
Path Ref.: DCP_AWeb
SGQ 201 Firma (R.G.Q.):
Verificato il:
40784
Mocella Vito Francesco
Firma (D.CO.):
IBP Bänninger Italia srl
Giovanni Ballerini
Quality & Technical Manager
IBP Bänninger Italia srl a Socio Unico
Piazza Meuccio Ruini 9A
43126 Parma (PR)
ITALIA
Tel: +39 0521 299711
Fax: +39 0521 299755
Web: www.ibpbanningeritalia.it
Società soggetta all’attività di direzione e coordinamento di CONEX UNIVERSAL LIMITED
an IBP GROUP company
C.F. / P. IVA IT 01728620343 Capitale Sociale Euro 516.400 I.V.
Reg. Impr. PR 01728620343 R.E.A. PR 174318 R.AEE n° IT08100000005603